Stay always up to date!
The IB-HUB1403B is meant to be used as a cable port (60 mm) in desks. It can be installed in pre-drilled holes without tools and offers enough space to run several cables through.
Modern notebooks usually have several USB Type-C™ ports, but no card readers and USB Type-A ports. The IB-HUB1413-CR has the most important of them on board, so that the familiar use of notebooks and PCs continues to be so easy.
The established, timeless design of the IB-377 series makes it easy to forget that this is indeed the currently youngest member of the family. As usual material and build quality are up to the high ICY BOX standard. The new member brings blazing fast data transfers with USB 3.1 (Gen 2) to the table to add up to the family.
With the help of the external USB 3.1 Type-C™ enclosure IB-1816M-C31 you can take one NVMe card with you quickly and easily. It allows access to M.2 SSDs of up to 2 TB no matter to which host you connect it. The IB-1816M-C31 is compatible with M.2 cards of 30, 42, 60 and 80 mm length, operating system-independent and suitable for a variety of applications such as high-speed storage, cloning a drive or running a mobile operating system.
If the shelf overflows with hard drives which are used regularly, the toolless use of the hard drives is a real blessing. Simply plug the hard drive into the bay and off you go. Since not every hard disk requires its own case, this DockingStation does not only saves money but also nerves.
Newly bought or used for a long time - but what is this small bay in a PC case? The 3.5" (floppy) bay in the front of most cases was used frequently in the past, but is now of little significance. The IB-HUB1418-i3 provides three USB Type-C™ and one Type-A connectors to fill the unused space with current connectors.
Thunderbolt™ 3 provides connectivity with highest data transfer rates and versatility. It has twice the bandwidth of Thunderbolt™ 2 and combines data transmission, video output and power supply in a single, compact port. By integrating Type-C™, the fast Thunderbolt™ 3 port has become even more practical since it can be connected in any orientation, making it a truly universal port.
It will never be an issue to find the fastest connection with this solid aluminium enclosure, thanks to its many available interfaces!
The IB-RD2253-U31 is a RAID system which provides space for two 2.5" hard drives or SSDs and due to the new USB 3.1 interface, data transfer rates of up to 10 Gbit/s are possible. The A-Type USB connector is backward compatible and can therefore be used with the "normal, old" USB slots, too. The outer shell of this external 2.5" RAID system is made of aluminum, which is supplemented by an air-permeable mesh of high quality plastic. Status LEDs are located on the rear panel and the front panel provides the USB 3.1 ports and the power supply as well as an on/off switch, reset button and jumpers for RAID levels setup. Since the case does not use a fan, it does not generate any operating noise at all.
This smart and robust USB 3.0 hub is not just a seven-fold port expansion, it charges mobile devices at full speed as well. This brings us directly to the main features of the IB-AC6702 - the USB ports are separately switched on and off and an LED indicator displays the current amperage of the device which is currently connected to the first port. The included 48 W power supply ensures that all USB ports are supplied with suffecient power (5 V / 2.4 A) while the smart chip used in the hub ensures that tablet PCs as well as smartphones of all manufacturers can be charged at full speed. Additionally, the USB hub has a surge protector, which optimally protects the connected devices.
USB 3.1 slowly establishes itself on motherboards and devices, such as our external enclosures. With USB 3.1, however, the new USB Type-C has arrived. It is reversibly plug-able and features up to 100 W power delivery, clear advantages compared to the USB 3.0 specifications. In light of these recent events: we present to you the new ICY BOX USB Adapter Type-A female to Type-C male. It requires no additional drivers, achieves USB 3.0 data rates up to 5 Gbit/s and it is also backwards compatible with USB 2.0.
Three different backplanes for up to five hard drives - robust industrial design including electrolytically sealed aluminum and designed for a long service life. These three hard drive backplanes are designed primarily for use in servers, which particularly demands high durability and quality of the backplanes. Therefore, the case itself is made of durable aluminum, which is also sealed electrolytically. Thus the case is even more resistant. On the inside Non-Scatch-SATA connectors are used, which are designed to outlast many hard drive changes. The backplanes support hard drives in the 3.5" format with both SATA and SAS interfaces and achieve data rates up to 6 Gbit/s. The drives are installed into the backplanes on individual hard-drive carriers using a flap-drawer system. The individual carriers are lockable. An elaborate temperature control and a 80 mm fan ensure that the drives are well tempered. In the event of overheating there is an audible alarm.
The ACK-540UEL is a wired keyboard with touchpad that fits where other keyboards are too big due to the KeySonic's convenient size. This mini keyboard does not have a numpad and arrow keys and therefore it has a compact size of 29 cm wide, which is a third less than a regular full size keyboard. Thanks to the smart touchpad, multi finger gestures are supported (for example scrolling) which set this input device very practical for Multimedia, service and IPC. This keyboard has a very quiet key stroke, with a comfortable tactile feedback thanks to the soft-touch membrane technology. The missing num-block is integrated in the main typing keypad and it can be used at any time by clicking on NumLock or by holding the FN key (function key). This keyboard is equipped with blue illumination which makes it perfect to use even in the darkest environements.
The powerbank for anyone that is always on time or would like to be! The new portable battery for charging smart devices - equipped with a clock, an alarm, a thermometer and a calendar. This powerbank is not just limited to its alleged main feature, charging, but in addition, it provides some extra features. Above all, is the LED display which indicates the current time, informs regarding the momentary temperature and has a calendar too, with which, being late is a thing of the past. Thanks to the integrated alarm, even the most persistent late sleepers will turn into an early bird. The alarm is set with the buttons on the top to the desired time. The Powerbank practically fits in nearly every pocket, since it is just as big as a cassette shell.
Following the motto: ‘You do not need to be big in order to be useful’ we present out new docking solution for notebooks and ultrabooks. Over just one single USB 3.0 connection, nine new different interfaces become available. Four USB 3.0 Type A, Two rapid USB 3.0 charging ports with 5V/2.1A, an HDMI® connector, a Gigabit LAN (RJ45) network interface, DVI-I (24+5 pin) and one 3.5 mm Stereo combo connector (for microphone and headphones). Those among us who still need a VGA connector can still profit from this little black box since a DVI to VGA adapter is included with the ICY BOX IB-DK2401AC. The DVI and HDMI® interfaces are able to mirror and or expend the display as wished and of course, all in ultraHD 4K resolution.
IB-276U3 the unprecedented protection which will let no hazard reach your data! The IB-276U3 is an external enclosure for 2.5" (6.35 cm) SATA HDD and SSD. It provides support for SATA I/II/III up to 6 Gbit/s and holds HDDs with a height of up to 9.5 mm. Because of the USB 3.0 interface and support of UASP the enclosure reaches transfer rates of up to 5 Gbit/s. The external enclosure reliably protects data drives against the most frequent adversities and biggest hazards, dust and water. The ICY BOX enclosure meets the IP66 standard and thus is dust tight and protects the inside data drive against powerful spray water. The USB 3.0 cable is readily available and operational since it is integrated in the IB-276U3's side.
Finally there is again more place for the mobile devices on the PC – When the USB 3.0 ports are all already used, this stylish slim hub it the most practical solution.
7-fold USB 3.0 aluminium hub with an external power supply
This hub brings to an abrupt end emergencies caused by having too little USB 3.0 ports available. In the delivery along with the hub, a 5V/4A power supply is included to make sure even the most power hungry devices get enough power.
Charging at top speed The IB-CH501 is an intelligent fast charger. It can charge up to five different devices simultaneously with 5V/2.4A per port and in order to make sure no harm will come to your devices, it has over voltage and short circuit protection.
The professional choice 2.5" HDDs and SSDs are getting more popular every passing day. Especially the SSDs since their transfer rates are far greater than traditional HDDs.This rack is made to fit into a standard 3.5" bay and can hold one 2.5" SATA/SAS HDD/SSD up to a height of 15 mm.
The IB-234-U31 is not only beautiful, but it is also equipped with the newest technology. The enclosure is made of high quality brushed aluminium and thanks to the 3.1 interface, this enclosure can reach transfer rates of up to 10 Gbit/s. IB-234-U31 is also working with computer/notebook with USB 3.0/2.0/1.1 interfaces. The full transfer rate of USB 3.1 can only be reached with USB 3.1 connection. You can upgrade your computer with a USB 3.1 PCI-e card (eg. ICY BOX IB-U31-02).
With fast USB 3.0 connection, aluminum case and support for 2.5"/3.5" HDD/SSD
Due to the combination of HDD/SSD docking station, USB hub and SD card reader the IB-111HCr-U3 is prepared for all situations:
1. Docking Station
Supports 2.5" (height 7.5 - 15 mm) and 3.5" HDD and SSD with a SATA I/II/III interface up to a maximum transfer rate of 3 Gbit/s.
2. SD Card Reader
Supports the commonly used SD card standards SD/SDHC/SDXC and provides transfer rates up to 5 Gbit/s.
3. USB Hub
2-fold USB 3.0 hub with a transfer rate up to 5 Gbit/s.
It supports 2.5" HDDs/SSDs with SATA I/II/III Connection and thereby maximum data rate up to 3Gb/s. The card reader supports the formats SD / SDHC / SDXC. Your data transfer is done via the USB 3.0 interface with transfer rates up to 5 Gbit / s.
When you are in a hurry
ICY BOX IB-AC603CR-U3 for 2.5" SATA HDD or SSD and 2 SD cards is a simple SATA to USB 3.0 adapter. This adapter connects an HDD/SSD and up to two SD cards to a PC or other USB 3.0 devices in a fast and straightforward manner.
You can transfer large amounts of data in a short time via the speed of USB 3.0 and subsequently remove the HDD/SDD without taking any extra steps.
With support for Full HD 1080p resolution and Plug & Play.
The IB-AC516 HDMI® to VGA plug connects HDMI® devices with VGA devices. The supported timing standards VESA and CEA ensure the output signal's quality and the Plug & Play support makes using the adapter very easy.
3 + 4 = 1
To sum it up, four SD cards and three USB sticks could be read and written at the same time.
Additionally, there is also a 5 V connector available. with it, you can add extra power to the hub (PSU not included).
Without an external power adapter the docking station receives power via the USB connection.
Thirteen at one Swoop
The USB charge port (5V / 2,1 A) meets the new battery charging specification (BC 1.2) and offers an easy way to charge tablet PCs, digital cameras and rechargable batteries with full speed.
The USB hub also comes with an external power adapter which makes it an 'active hub'. Thus even external hard drives and other power consuming devices are provided with enough power.
Additional LED for each USB port inform about the status of the connected device and the on/off switch provides the possibility to turn off the hub if needed.
Converts a Micro-B USB 2.0 interface to a RJ-45 Ethernet (10/100 Mbps) port.
The ICY BOX adapter converts a USB 2.0 port (Micro-B type) to a RJ-45 Ethernet port (max. transfer rate 100 Mbit/s).
The IB-AC510 is especially suited to connect your notebook or tablet PC with your existing network, even when there is no reliable wireless LAN possible.
With USB 3.0 interface, toolless installation and leatherette case with a strong magnetic latch.
Elegance for Excellence
The IB-255U3 is an external enclosure for 2.5" HDDs and SSDs. Thanks to the USB 3.0 interface and the support of SATA III and UASP the possible transfer rates are up to 5 Gbit/s.
The enclosure is fitting for HDDs with a height up to 9.5 mm. The 2.5" HDD is enveloped inside the enclosure in a silicone sleeve and is protected on the outside thanks to the PU-leather case. The Casing has two slits in credit card size on the inner side for notes, cards and more.
The retaining strap closes the enclosure with a hidden magnet mechanism. In addition, an LED inside the enclosure can display information regarding HDD activity and power.
With an external power adapter and a USB charge port for smart device
The Magnificent Seven
The USB charge port meets the new battery charging specification (BC 1.2) and provides a convenient way to recharge smartphones, Tablet, digital cameras, and rechargable batteries with full speed. The USB hub includes an external power adapter as well which makes it an 'active hub'.
Thus the hub provides enough power, even for external HDDs and other power demanding devices. Besides that, each individual USB port has its own LED to show the status.
USB 3.0 has a bandwidth of up to 5 GBit/s. With this hub you can use the fast USB 3.0 for seven devices. USB 3.0 is downwardly compatible, it works with USB 2.0 cables and devices (with the appropriate transfer rates).
With USB 3.0 interface, JBOD support, stand-alone cloning and aluminum case.
This fourfold docking station is the ideal solution if you have a cabinet full of HDDs which are often used. It is perfect as well if you are creating backups on a regular basis. In addition, the case made of aluminum is durable and good-looking.
The IB-141CL-U3 is a 4-bay docking station with support for both 3.5" and 2.5" SATA I/II/III drives. The highest transfer rates of up to 5 GBit/s is achieved thanks to the USB 3.0 interface. Even 12V HDDs are supported because of the external power supply. In addition there are no restrictions regarding the HDD's capacity.
When connected to the PC and used with more than one drive, the docking station utilizes its JBOD mode. Thus all connected drives are recognized as different drives by your operating system. Furthermore, when using more than one drive, it is possible to clone even bootable drives so that startup/system drives can be cloned as well.
Audio transmission via USB port, support for Full HD 1080p and Windows, Mac and Linux
The IB-AC512 adapter converts an analog VGA interface to a digital HDMI® interface with audio transmission.
This way, it is possible to connect notebooks/tablet PC via VGA output to a monitor or projector using a HDMI® input.
The audio signals are broadcast to the HDMI® port via a USB interface.
For 2x 2.5" HDD/SSD, with stabelizing silicone holder and JBOD support
Twice as easy
The ICY BOX Adapter for 2x 2.5" SATA HDDs or SSDs consists of an adapter SATA to USB 3.0 and supports SATA I/II/III.
With the IB-AC622-U3, HDDs are easily conntected to a PC, mediaplayer, TV or the like. Due to the fast USB 3.0, data is transfered very quickly between the two connected drives or the host PC. Afterwards HDDs or SSDs and the adapter are disconnted with ease.
Because of the JBOD support, the connected HDDs or SSDs are recognized and displayed as two separate drives. An additional silicone holder stabalizes the drives as a double decker.
It Upgrades notebooks with USB 3.0 port to 4K Ultra HD video output (up to 3840x2160 pixels)
As sharp as it gets!
The IB-AC513 is a small and light adapter. It can be used with any notebook with a USB 3.0 port in order to connect to 4K Ultra HD monitors / TVs with a resolution of up to 3840x2160 pixels.
Up to six IB-AC513 can be connected to one notebook without installing an extra video card. The adapter can be use to both extend or mirror the actual notebook display to additional screens.
Cable and connector with blue lighting for a little bit extra and support for SATA I-II-III drives
When in a hurry
The ICY BOX IB-AC603L-U3 for a 2.5" HDD or SSD is a SATA to USB 3.0 adapter with the power supplied via the USB interface.
A drive is easily connected to a PC, media player, TV or the like using the adapter. The blue lighting makes it an eye catcher.
Large amounts of files are transfered via the fast USB 3.0 interface and the drive can conveniently be disconnected with ease afterwards.
Extends from a single USB 3.0 port to VGA, HDMI, Gbit LAN and USB 3.0
Portable practical extension
The IB-DK401 extends a notebook / PC via the integrated USB 3.0 cable to connect a VGA & HDMI port and allows a direct connection to a TV, projector or other monitors.
Further to the USB 3.0 port there is a Gigabit LAN port on the housing for a router or switch.
Provides the possibility to control an Android mobile device via PC using keyboard and mouse.
Many people use a smartphone as their mobile office when on one's way.
Typing long texts and navigating in documents is unhandy in the long run, however. With the ICY BOX AC511 adapter every device running an Android operating system can conveniently be duplicated to a PC or laptop and can even be operated by that! Easy typing, exchange of files and using the clipboard - no issues whatsoever.
Even the laptop's touch screen can be utilized and the smartphone's or tablet's battery is charged at the same time when connected to USB by the IB-AC511 cable.
Smartphones and tablets with Android 4.1 or later and a microUSB interface are supported. You also need a PC running on Windows 7 or Windows 8 and providing a USB 2.0 oder USB 3.0 interface.
Following devices are supported:
• Sony®: Xperia Z1 / Z2 / C / Z / Z Ultra
• Nexus®: Nexus 7
• HTC®: HTC New one / (M8), Desire 501/816
• Asus®: PadFone2
• Samsung®: Note 2 / 3, Galaxy S2 / S3 / S4 / S5
• MI®: Mi 2S, Redmi
• Coolpad®: 7295T
With Full HD (1080p USB 3.0) support. Capable of e.g. mirroring or extending a notebook on a projector.
Suitable in a 3.5" standard bay. The frame is made of metal and the front-flaps are made of aluminum.
This is the way for two 2.5" SATA HDD or SSD to fit into a 3.5" bay. Each has its own front-flap and an LED for power and access indication.
Easy Swap allows for quick mounting and demounting without any tool.
Adapter from Mini DisplayPort (input) to HDMI (output). Supports Ultra HD and has a very strong EMI protection.
Extends Notebooks and PC with various video, audio and network interfaces and is connected by a USB 3.0 interface.
Allrounder in fancy piano lacquer look
The IB-DK2241AC extends a notebook or a PC via the USB 3.0 port with DVI-I, HDMI, several USB 2.0 and USB 3.0 ports, as well as Audio in/out and a gigabit Ethernet port.
It allows you to connect a DVI & HDMI TV, projector or monitor and up to 4x USB 2.0 and 2x USB 3.0 devices, furthermore you can connect a headphone/microphone and the ethernet port connects to a network.
Adapter from Mini DisplayPort (input) to VGA (output). Supports Full HD 1080p and has a very strong EMI protection.
The IB-AC6033-U3 connects 2.5" SATA drives via USB 3.0. In addition, with its aluminum housing, it provides an appropriate storage space for the adapter as well as the HDD/SSD.
The brilliant combination of adapter and additional protection box is what makes the IB-AC6033-U3 flexible. On the one hand it can be utilized as just an adapter to connect a HDD or SSD. On the other hand, when combined with the aluminum protection box, it's close to an external enclosure. Protected from slight damage and dirt.
The IB-AC611 features four USB 3.0 interfaces and an additional USB charge port for charging smartphones or tablets.
The housing of the IB-AC611 is made of aluminum and is therefore particularly robust and of supreme quality. Since the hub has an additional power supply, high powered devices can be connected, eg external hard drives.
The IB-AC502 is a HDMI A-Type (input) to VGA (output) converter with support for HDMI 1.4b and lower, with a Full-HD 1080p resolution. The adapter works without additional software. It should be highlighted that the IB-AC502's EMI shielding's quality is especially high.
The RAID system supports RAID Level 0, 1 and JBOD (Spanning / Single). The IB-RD3620SU3 is a perfect fit for the use as backup or as pure data storage. When used as backup, the Auto Rebuilding function and the trayless drive mounting is especially useful.
JBOD (RAID 0 Spanning) Spanning concatenates multiple hard drives as a single large volume; resulting in a seamless expansion of virtual volumes beyond the physical limitations of separately connected hard drives. The data are written from HDD1 to HDD2.
JBOD (Single) Hard drives are being handled independently as separate logical volumes where files are stored.
RAID 0 (RAID 0 Striping) Striping is a method of concatenating multiple hard drives into one logical storage unit. It is the automated process of writing data across multiple drives simultaneously. Striping is used to increase the performance of disk reads. The multiple hard drives will write data in "column" effect. If one drive in a striped set fails, all of the data in the stripe set is lost.
RAID 1 (RAID 1 Mirroring) Mirroring is the automated process of writing data to multiple drives simultaneously. Mirroring is used to provide redundancy. If one drive fails, the redundant drive will continue to store the data and provide access to it. The failed drive can then be replaced and the drive set can be rebuild.
For 2.5" as well as for 3.5" SATA drives. This docking station supports JBOD, Hot Plug & Play and HotSwap.
For a cabinet full of HDDs which are commonly used one wants a docking station like this. Even for regular back ups the IB-122CL-U3 is suitable.
The IB-122CL-U3 is a 2-bay docking station for 3.5" as well as for 2.5" SATA I/II/III drives. A maximum of data transfer speed up to 5 Gbit/s is possible due to the USB 3.0 interface. The external power supply provides the possibilty to use 12V HDDs, too.
When connected to a PC and with two drives plugged in, the JBOD function is utilized - both drives are recognized as two separate drives. When using two drives, one of them can be cloned at the push of a button. Even cloning of bootable drives is possible.